- Location
- Bentley, near Farnham
- The job
- Heat-only boiler replacement plus an urgent hot water cylinder replacement
- Equipment
- Viessmann Vitodens 100-W 11kW heat-only boiler with weather compensation, quick-recovery vented cylinder, Honeywell controls
- Completed
- September to October 2023
The challenge
This family home in Bentley had an old, inefficient boiler in a kitchen wall cupboard, and it had reached the end of its life. The family wanted a quality, efficient replacement that would last.
The house runs on a hot water cylinder, which suited the household well. So rather than push a combi, we recommended a heat-only boiler that would keep the cylinder system and the hot water setup the family were used to.
What we did
- Protected the kitchen first: dust sheets on the worktops and floor, and the cooker wrapped up
- Fitted a Viessmann Vitodens 100-W 11kW heat-only boiler in the same kitchen cupboard, sized to the home
- Paired it with weather compensation, so the boiler adjusts to the temperature outside
- Upgraded the controls to Honeywell: new programmer, room thermostat, cylinder thermostat and mid-position zone valve
- Made minor pipework alterations and ran the condensate to the existing drainage under the worktop
- Chemically flushed the system, added inhibitor and fitted a magnetic system filter
- Carried out electrical safety tests, commissioned the boiler with a combustion analysis and balanced the radiators using thermal imaging
- Took all waste away
The surprise: a leaking cylinder
While we were working on the system, we spotted that the hot water cylinder was leaking from its side. It was too old to repair. We talked it through with the family and agreed to replace it straight away, while the system was already drained down. That saved them a second round of disruption and the risk of the leak getting worse.
We fitted a new, more efficient vented indirect cylinder (1050 x 450mm) with a quick-recovery coil, adapted the pipework, insulated it, then commissioned and leak-checked everything. The new cylinder was in and working the day after we found the problem.
A quick-recovery cylinder heats a full tank faster. That means shorter boiler run times and less on-off cycling, which helps a condensing boiler like the Viessmann run at its best.
The result
A modern, efficient heat-only boiler with weather compensation, a new cylinder that heats up quickly, and no more worry about a leaking tank. The family were happy enough to have our team back later to replace some of their radiators, and we have serviced the boiler every year since, most recently in May 2026.
Photos from the job





Want to keep your cylinder and upgrade the boiler? Read about our boiler installations, hot water cylinders and boiler servicing, or ask for a quote.
More projects like this
CommercialFarnhamChurch plant room rebuild and bespoke heating, FarnhamTwin Viessmann boilers, a rebuilt plant room and five made-to-measure fan convectors finally brought warmth to every room of a Farnham church.Read the story
Boilers and heatingFarnhamAriston to Viessmann boiler replacementA boiler that kept losing pressure in a cold Farnham home, replaced with a Viessmann Vitodens 100-W and pipework changes for better flow to every radiator.Read the story
Boilers and heatingFarnhamCombi boiler moved from bedroom to loftA combi boiler moved from a bedroom into the loft, with a new vertical flue, frost protection and parallel insulated pipework the homeowner called a work of art.Read the storyReady when you are
Tell us what you need and we will come back to you with a clear, fixed price. No pressure, no hard sell.